Circuit breaker DMX3 1600, 3 poles, draw-out version and electronic protection unit

Name: Circuit breaker DMX3 1600, 3 poles, draw-out version and electronic protection unit
SKU: 028082

DMX³ 1600 LEGRAND

REF. 028082 EAN. 3414971419698

Compare You can only compare 4 products, you must remove 1 to add this one

Breaking capacity of 50kA, according to EN/IEC standard 60947 - 2, suitable for protection of high power industrialinstallations. Rated insulation voltage of 1000VRated impulse withstand voltage of 12kV
Climatic condition according to IEC/EN 60947 - 1 Annex Q, Cat. F subject to temperature,humidity, vibration, shock and salt mist.
Electronic protection module ot type MP4 (adjustments accomplished by selector switches). Thermal protection within range of 0,4 - 1,0 of the rated current.Magnetic protection within range of 1,5 - 10 of the rated current.
Can be equipped with releases (undervoltage and shunt releases) and auxiliary contacts.Can used with rotary handles or motor operator.Locking accessories are available.
Has diffent type of possible connection accessories: cage terminals, spreader and rear terminals.Is available also in a plug-in version (circuit breaker fitted with special terminals and mountedon a plug-in base) or in a draw-out version (a plug-in version fitted with a"Debro-lift" mechanism which can be used to withdraw the breaker whilekeeping it on its base)

Electric and mechanical robustness, in addiction to breaking capacity and chances of accessorizing, are perfectly suited for increase continuity service looking at the plant energy efficiency and in respect of “green aspects”

DMX3 platform provide a complete "project" approach in premiummarket segment, offering a range completely suitable for high powerapplication

Rear terminals not mounted by default on the device to avoid to buy and to throw away them, in case of use of front terminals connection.Connection choice done by customer,according to specific exigences, so to optimize costs.

Rated permanent current Iu	800 A
Rated voltage	220-690 V
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz	50 kA
Overload release current setting	320-800 A
Adjustment range short-term delayed short-circuit release	1200-8000 A
Adjustment range undelayed short-circuit release	1600-50000 A
Device construction	Built-in device slide-in technique (withdrawable)
Integrated earth fault protection	No
Type of electrical connection of main circuit	Other
Suitable for DIN rail (top hat rail) mounting	No
DIN rail (top hat rail) mounting optional	No
Number of auxiliary contacts as normally closed contact	0
Number of auxiliary contacts as normally open contact	0
Number of auxiliary contacts as change-over contact	4
With switched-off indicator	Yes
With integrated under voltage release	No
Number of poles	3
Position of connection for main current circuit	Back side
Type of control element	Push button
Complete device with protection unit	No

Motor drive integrated	No
Motor drive optional	Yes
Degree of protection (IP)	IP30
Width	282 mm
Height	352 mm
Depth	306 mm
Degree of impact strength (IK)	Not applicable
Operating / setting temperature	-5-70 °C
Storage temperature	-25-85 °C
Voltage type	AC
Frequency	50-60 Hz
Electric supplying direction	By the top
Terminal marking indication	No
Colour	Grey
RAL-number	7035
Halogen free	Yes
Terminals capacity	120-1000 mm²
Cable nature for connection	Flexible or rigid
Label space/information surface	No